LEDme™ QUICK CONNECT™ Pendants

LEDme™ QUICK CONNECT™ Pendants

1.Are you LEDmeTM Pendants UL Listed?

Yes. They are U.L & C.U.L listed for the United State and Canada.

2.What is the voltage/light output drop when using braided cord longer than 6 ft?

There is minimal voltage drop when using a longer braided cord, however we don’t recommend a cord longer than 15 feet.

3.Are LEDs replaceable like incandescent bulbs?

LEDs are replaceable. Contact a WAC lighting specialist for component and model number.

4.Can I use the LEDme™ pendant in Flexrail1TM, 120V Track, or any other track and rail system?

You may only use LEDmeTM pendants on the SOLORAIL™TM and DUORAIL™TM low voltage systems. You may not use the LEDme™ pendants on a line voltage system.

5.Can I use the LEDmeTM Pendants in a Monopoint?

LEDmeTM Pendants can be ordered as a Monopoint.

6.How do I order a LEDmeTM Pendants for each of the different systems?

You will have to order a Quick ConnectTM adapter for the corresponding system. (Ie: LM-QADP, for SOLORAIL™TM system)

7.Can I use the LEDmeTM Pendant in a Multipoint?

No.

8.Can the LEDmeTM Pendants be field shortened?

Yes. LEDmeTM Pendants can be field shortened.

9.Can I adjust the length of the LEDmeTM Pendants after I have field shortened them?

You cannot adjust the length of the cord once it has been shortened, however, if you are using the LED Monopoint, you can adjust the length up to 4 inches.

10.What is the lifetime of a LEDmeTM Pendant modULe?

50,000 hours for Genesis, Über and Quest LEDmeTM Pendants. However, our QUICK CONNECT™ 500 Series Glass pendants operate with LEDs featuring a 30,000-hour life when used with QUICK CONNECT™ Socket Sets.

11. How else are LEDmeTM Pendants energy efficient or sustainable?

LEDme™ QUICK CONNECT™ Fixtures have a Five-Year Warranty and are Responsibly produced in the WAC’s clean, zero landfill manufacturing campus.

12. Can I use magnetic or electronic transformers for LED pendants on a rail?

For rail mounting, electronic transformers should be used when wattages are greater than 150 watts.

13. Can I use an EN-HQ50AR with an LED pendant on line voltage track?

Due to minimum load requirements, the line voltage track is not suitable for an LED fixture.