LEDme™ BUTTON LIGHTS – FREQUENTLY ASKED QUESTIONS

LEDme™ BUTTON LIGHTS – FREQUENTLY ASKED QUESTIONS

1.Are the LEDme™ Button Lights UL listed?

Yes, they are U.L & C.U.L listed for both the United States and Canada.

2.Why does the LEDme™ Button Light get warm?

The LEDs do not project any heat downward, however, the metal housing acts as a heat sink, therefore it gets warm.

3.Are the LEDme™ Button Lights dimmable?

No, Currently LEDme™ Button Lights are not dimmable.

4.How is the life expectancy calculated for LED products?

Unlike halogen calculations where the lamp life is rated at the point where 50% of the lamps fail, LEDs life expectancy is the point which the lamp is at 70% of its original output (brightness). All of our LEDme™ Button Lights have a 50,000-hour life.

5.Can the LEDme™ Button Lights be wired in series?

Yes, see diagram below

*However, the dimmable version cannot be wired in series.

6.Are the LEDme™ Button Lights the same size as the other Button Lights offered?

The LEDme™ Button Lights are slightly smaller than the xenon/halogen Button Lights we offer. However, there is a housing to adapt the larger opening to fit the smaller LEDme™ Button Light. (HR-LED-COV-XX) (XX refers to the finish of the housing you are looking for: BK, BN, CB, CH, DB or WT)

7.Can the LED module be switched out, or does the entire unit need to be replaced if the LEDs fail or burn out on the LEDme™ Button Lights?

Yes. You can change out the module (model number: RM3X1-30-HR) without soldering.

8.How are LEDme™ Button Lights sustainable?

LEDme™ Button Lights use energy efficient state-of-the-art LED technology. LEDme™ Button Lights have a Five-Year Warranty and are Responsibly produced in WAC's clean, zero landfill manufacturing campus.